Mac mini With Front Row Hacked Into Toyota Prius

Posted by Frank Bisono Categories: Apple, Mods / Hacks, PC / Laptop, Transportation

No, that’s not a go-kart sized version of the Prius, it’s a Mac mini running through the on-board display of a Toyota Prius!  Nice hack by a post from a member of the MacVroom forums. Dr. FrankenMac has almost brought this beast to life, but still has a few bugs to iron out…

So my goal was to get a mac working on my Prius’s MFD display, and be able to use it’s touch screen to control the front end (currently Front Row)

I don’t have audio hooked up, figured the video would be the hardest part.

I’m going through a Can-View which normally is just used for display the car’s CAN data http://hybridinterfaces.ca/, but has RGB+S in and outputs the MFD’s touchscreen through a serial cable.

I tried using SwitchResX to output the 640x480 at 15.75khz with no luck (got it working with powerstrip on a pc) Ended up buying a used scan converter off of ebay that outputs RGB+S.

Wrote a perl script to listen to the serial port (keyspan USB->serial converter) and sends Front Row commands through apple script. Broke the screen up into a 3x3 grid (9 boxes) Up, Down, Left, Right, center for enter/play/pause, and left top for menu/escape.

Here is what I have so far. This is just the prototype phase. I need to figure out audio, and then I’ll actually get a mac mini and try to hide all the components.

You can check out some of the images on his website.  For the full scoop, check out the post on MacVroom.com.

Read More | MacVroom.com